Road Block Threadcake

A few weeks ago I learned of the Threadcakes contest from Threadless.  It definitely sounded like something that I should participate in, so my wife and I set about planning.  Having only made one carved and fondant cake prior to this cake (an armadillo grooms cake), we had no doubt that we’d get anywhere near to winning. 

The competition basically is to create a cake based upon one of the shirts that Threadless sells.  We decided upon the Road Block shirt.  It wasn’t so detailed that it would take forever to create or be hard to cover with fondant, but was interesting enough to make a good cake.  If you want to skip to the entry page at Threadcakes you can go directly there.

For the cake we used the chiffon cake recipe from the Culinary Institute of America’s Baking and Pastry: Mastering the Art and Craft.  We used a store bought fondant for covering as well as store bought pre-mixed gum paste. We used a simple vanilla butter cream frosting rather than the more complicated icing I’d normally use.

Here is the mise en place for the cake.

The wet ingredients get measured out.  This is the first of two half-sheet cakes that we made for the cake.  Each half sheet cake used about 25 eggs.

The wet ingredients get mixed and then set aside.

Then it’s time for the dry ingredients.

Then the wet meets the dry in slow increments.

And once again a merinque gets made.

And then folded slowly into the mixture to give it an extra fluffy texture.

There was so much batter that I wasn’t sure it’d fit into my large kitchen aid mixer, so for the first batch I ended up splitting the batter into two bowls.

Then the batter goes into the pan and into the oven to bake.

Here is the cake after baking.  A half sheet cake is quite a large cake.

A nice close up of a corner of the cake.

Now comes time to start carving.  This is a leveled piece that is ready for frosting.  This piece will eventually become the base of the final cake.

The base gets frosted and stacked two cakes high.  The whole thing was then frosted and put into the fridge to harden the frosting so that applying the fondant is easier.

Then it was time to color all the gum paste and fondant for the cake.  I did them all in one sitting and then set them aside inside plastic bags to keep them soft.

Then it was time to frost and carve the ice cream truck for the cake.  It was three cakes high.

Here is the truck after carving and icing.

This is the orange fondant for the base of the cake all rolled out.  I ended up doing a poor job of rolling and in the end you could definitely tell that the fondant wasn’t all of the same thickness.  I’ve earned a new appreciation for rolling pin spacers, though since the pieces of fondant was so large, I would have needed a larger rolling pin.  Also, you’ll notice here one of my favorite kitchen item, the rollpat.  It is basically a large version of a silpat that is specifically designed to roll things out on.  I don’t end up getting to use it often enough since I rarely have space for it to be laid out.  It is also the perfect surface for kneading bread.

The base of the cake gets covered with the orange fondant.  We ended up getting tears at most of the corners.  Also, I’m not quite sure how to get the vertical edges to be perfect.  We ended up using kitchen scissors and cutting the excess down off the edges and then smoothing the pieces together.

Here is an early incarnation of the walrus.  We decided to make him out of rice crispy treat since it would be easier to shape that way than trying to carve cake.

Then it was time to make the ice cream man.  He is made entirely from gum paste.  These are early legs that turned out too large for the cake.  Also, we discovered that putting some vegetable shortening on your fingers and working a little into the gum paste will stop it from drying out so quickly or sticking to your fingers.

Here is the gum paste ice cream man drying.  Next to him is two sets of tusks for the walrus.  We made two because we weren’t sure of the final size of the walrus.

Here is the walrus after being covered with fondant and in the process of further shaping of the fondant.

And just to prove that he is rice crispy treat, here is the underside of the walrus.

We put squares of the grey fondant onto the ice cream truck where the doors and windows would be.  Then covered the entire truck with white fondant and cut out the windows and doors.  After that we combined black gel food dye with vodka to create a dye to paint on the details of the truck.

Here is the walrus with his large tusks and having been sprayed with some black spray food dye for shading.

And here are all the final pieces, prior to assembling them on the cake.

And now it’s time for assembly.  Here is the base of the cake.

The walrus goes on first.

Followed by the ice cream man.

Then we put some dowels into the cake to hold the ice cream truck up off the cake so that the wheels would look more realistic.

Then the ice cream truck went onto the cake.

Here is the final cake with all pieces on.

And a close up of the walrus’s face.

And the ice cream man.

And the ice cream truck.

Here is the cake from a different view.  My wife insisted on painting on the headlights for the ice cream truck so that it’d be more realistic.

And then came the hard part.  For the competition you had to take pictures of you cutting into everything to prove that it was cake.

This is the piece we cut out of the base.

And this is the piece cut out of the ice cream truck.

This is ice cream truck after the carnage.

All in all it was a fun process, even if it took longer than we thought.  But we definitely learned a lot about cake decorating and got a new appreciation for those that do it for a living.

Sour Cream Coffee Cake

This week I’ve baked a sour cream coffee cake.  Coffee cake does not actually have any coffee in it, but rather it is a cake that is often served and eaten with coffee.  This recipe comes from a different book from the Culinary Institute of America: The Culinary Institute of America Cookbook: A Collection of Our Favorite Recipes for the Home Chef.  This book, as you can see from the title, is unlike their other books in that it is targeted at the home kitchen.  It produces much smaller quantities and uses volume measurements for just about everything rather than weights.

Here is the mise en place for the coffee cake.  I’ve got too much butter out here, all you really need is 3/4ths of a cup.

This is the measured ingredients for the streusel filling.  Were I to make this cake again, I would make a second batch of this streusel, omitting the chocolate chips to use as a topping.  Also, if you like nuts, then some chopped nuts would go nicely in this streusel.

The streusel should get mixed and then set aside until later.

Then the dry ingredients also get mixed and set aside.

The wet ingredients, except the sugar and butter, go into a third bowl.

Then they get mixed and set aside.

The butter and sugar go into the stand mixer.

This was my issue with this recipe.  This is the fourth bowl I’ve had to use to make one coffee cake.  You could probably go without the bowl for the streusel and mix it in the bowl for the dry ingredients, but that still leaves you with three dirty bowls.

The butter and sugar get creamed together with the paddle attachment.  Then the dry and wet ingredients get mixed in, alternating them, a third at a time.

Then half the batter goes into the pan.  I’m using an angel food cake pan here, but a Bundt cake pan, a loaf pan, or any cake pan would do.

With half the batter in the pan, top it with the streusel mixture.  Then you can swirl it into the batter slightly with a wooden skewer, so that you don’t end up with just a flat layer of streusel in the final cake.

The streusel then gets topped with the other half of the cake batter. 

If you made streusel for topping the cake, you would put it on top the cake now.  Or depending on the cake pan, you may want to put it into the pan prior to adding any batter.

The coffee cake is done when it is golden brown on top and a skewer comes out clean.

After cooling for a while in the pan, it should be removed and moved to a wire rack to complete cooling.

And of course, here is a close up of the coffee cake, ready to be served.